Baikal A2000 Unboxed: How to Setup and Configure the Baikal Giant+ 2000 Mhs

I received a new member to my Baikal family, the A2000. In this video, I walk you through an unboxing and complete setup of the unit to get hashing right away!

You can find your own units from many different vendors, below are some links on eBay if you want to get yours today:

New Baikal A2000 (very hard to find under 00)

DPS-1200 Breakout Board

New HP DPS-1200 1200 watt power supply

Refurbished HP DPS-1200 1200 watt power supply

DPS-1200 6pin PCI-e Breakout Board

➤ Genesis Mining: Use Promo Code “MSimqX” for 3% off your purchase. Sign up TODAY!
★ Cloud Cash Rebate: Get 3% EXTRA hashing power back when I use your promo code. Make sure to leave a comment with your amount and code!

➤ Coinbase: Receive after 0 deposit: Join today at

➤ Love the videos, help support our channel with crypto donations 🙂

BTC: 37EKQ67ACJAzD22bWQRJgqpXh6F64huPrV
LTC: LL93MtunasugeQUr2BcuRG2VweoHVnkQk3
DASH: XwwruMj6RzZUj8EqUvadaieYCzTJWTC2RM
ETH: 0x73988644ac416A15A716c07809950EB897280dfa

✔ Let me know what you thing of the videos. Don’t forget to like and subscribe 🙂

Rockminer Rocket RK-BOX 450 – 480 GH/s Miner Raspberry Pi Setup Guide

This video will teach you how to setup the Rockminer “Rocket” RK-BOX.

Raspberry Pi Software Download

Win32 Disk Imager

In-stock with immediate shipping:


Online shop (cheaper):


How to Setup Rockminer R-Box using Raspberry Pi and cgminer

This video will show you how to setup a R-Box using a Raspberry Pi.

Raspberry Pi Software (version 0.3.0) Download

Raspberry Pi Software (version 1.3.0) Download

Win32 Disk Imager

Buy Rockminer R-Box NOW:

Finally!! KNCminer Jupiter Unboxing and Setup

Find this and more great products @ Video of me opening and setting up my KNC Jupiter bitcoin miner. If I can do it, anyone can. If you like my video and it helped you set up your knc miner ASAP, please donate bitcoin.
Also, please contact me if you need further help. Ive learned a lot since Ive posted this.


OR Litecoin:


KNC firmware links:
.99 recommended with enable cores

KNCminer manual:

Putty link:

Disclaimer: Im in no way promoting mining or saying its a good investment. Any comments I make or advise I give is simply my opinion. Please do your own research, as I did, to come up with your own calculated risk assessment.

Temporary installation of my newly arrived KnC Miner Neptune.

Gridseed 5 chip Asic Miner – Scrypt & Dual Mode Setup

My look at the gridseed and a quick setup guide! Gridseeds don’t play well with Antminer U1/U2/U2+ so unplug them before use.

Gridseed has a noisy 90mm fan on a 80mm mounting but in dual mode or BTC needs a good fan as it gets hot when Mining BitCoin or other SHA256 coins. If using Scrypt mode LTC / Doge etc only a cheap 80mm fan can be put on instead I’ll make a video of that soon.

The Gridseed need 60W in either BTC mode (900MHz) or Dual mode (750MHz) or around 10W (900MHz) Scrypt mining.

Let me know if you want any more videos on Gridseed or other miners!

Gridseed can be quite tricky to get working so follow these steps:

1.Power Up gridseed with 12v center positive barrel and connect mini-USB to chosen controller.

2. Install driver: Windows needs:
Then install 32/64 bit version, depending on your windows.

If Dual Mode Continue to step 5

3. If Scrypt only Download CGminer:
UPDATE: BFGMiner 4.0.0 Also works:

4. Use config Similar to this:
cgminer.exe –scrypt -o stratum+tcp://POOL:Port -u USERNAME.MINER -p PASSWORD –gridseed-options=baud=115200,freq=900,chips=5 –usb :1 –hotplug 5

If Scrypt only, Your done! If you wanted dual mode do not use the above mining software.

If Dual mode,
first go to device manager and check the com port you have installed to. My Computer-System Properties-Device manager-Ports COM & LPT and now make a note of which COM port your using, e.g: COM17 etc.

5. Download Zardig:
Select list all devices under options
Scroll to “STM32 Virtual Com port” or Older versions will be something like “Silicon Labs CP202x USB to UART Bridge”
Replace Driver with WIN USB driver.

6. Unplug all Antminer U1/U2/U2+ as they mess with the next steps.

7. Download CGMiner and CPU Miner

8. Edit the Bat of CGminer to something like this:
cgminer.exe –gridseed-options=baud=115200,freq=750,chips=5,modules=1,usefifo=0,btc=16 –hotplug=2 -o stratum+tcp://POOL:PORT -u USERNAME -p PASSWORD
Then Start it, When a share has been accepted move on to next step.

9. Modify CPU Miner BAT File Make sure virus scanner doesn’t attack it add it to exceptions list.
minerd.exe –dual –freq=750 –gc3355=COM19 -o stratum+tcp://POOL:PORT -u USER.WORKER -p PASSWORD

The COM Port is the port you looked at earlier before installing with Zadig.

Your Now mining! woo! At this point you can plug your Antminer U1/U2/U2+’s back in and start a seperate instance of BFGMiner to miner with those.

Thanks to all the resources I used, (CGMiner, BFGMiner and CPUMiner) and especially thanks to: As they had the best resource for the Gridseed.

BTC: 14uUbzJSi2t5MGgYH72PdTonD22V8drBVN
Doge: DTHbar4BRRmxx2YBjkYj23epzJG7Z2g5cx
Google+ :
Folding@home team: 123464

How to setup Rockminer R3 Asic Bitcoin Miner using raspberry pi

This video will teach you how to setup the Rockminer R3 Miner.

Raspberry Pi Software Download

Win32 Disk Imager

In-stock with immediate shipping:

Online shop (cheaper):


1 2